|
| SPI FSP180-50NIV 180w Micro power supply |
$28.00 |
| SPI FSP180-50NIV 180w Micro power supply - Not In Stock |
| |
| |
Features
Complied with SFX and SFX12V standard
High efficiency and reliability
Remote On/Off function
Internal 12V DC fan included
Noise Killer (Thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
Input Characteristics
Input Range: 95~132/190~264V AC, Manual selection
Frequency: 47~63Hz
Input Current: 6A (RMS) @115V AC, 3A (RMS) @230V AC
Inrush Current: 50A Max for 132V AC Cold start
Specification
Temperature Range: Operating 0° C ~ +50° C on full load; storage & shipping -20° C ~ +65° C
Humidity: 90% on operating and 95% on storage
Dielectric Withstand: Input to frame ground 1800V AC for 1 second
Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time: Less than 20ms on all output
Hold-up Time:16.6ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA
MTBF: 100,000 hours on maximum load at +25° C degree
Dimension (WxHxL): 125x76.4x100mm/5”x3”x4” inches |
|
