|
| Dlink DFE-530TX 10/100 network card Pci |
$15.00 |
| In Stock |
| |
| |
Product Description:
The D-Link DFE-530TX+ is a 10/100Mbps Fast Ethernet 32bit PCI Adapter for desktops, workstations, and servers. The DFE-530TX+ supports a wide range of operating systems including Macintosh and Windows.
With support for IEEE802.3 and IEEE 802.3u standards, the DFE-530TX+ supports 10BASE-T and 100BASE-TX networks. The DFE-530TX+ utilizes auto-negotiation to automatically adjust to the highest supported transfer rates up of to 200Mbps in full duplex mode.
Technical Specifications
Features PCI Local Bus Master 2.1/2.2 Support
Plug-and-Play installation
Supports 20/200Mbps in Full Duplex Mode
Supports 10/100Mbps in Half Duplex Mode
Supports PCI 2.1/2.2 ACPI Power Management Wake-On-LAN (Magic Packet, LinkChg and Microsoft wake-up frame) Compliant to PC 99 Standard
Independent 2Kbyte receive and transmit FIFOs
Drivers Supported
Windows XP/Me/2000/98SE/98/95/NT 4.0
Apple Macintosh 9.x or 10.1x
NDIS 2.0 for Microsoft LAN Manager for DOS
NDIS 2.0 for Microsoft Network Client 3.0 for Workgroup 3.11
Packet Driver
Novell Netware DOS ODI Driver
Novell Netware Server v3.12, v4.1x and v5.0
Linux
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX FastEthernet
ANSI/IEEE 802.3 NWay Auto-Negotiation
IEEE 802.3x Full Duplex Flow Control Support
Network Media Ethernet:
UTP Cat3, 4, 5 EIA/TIA-568 100-ohm screened twisted-pair (STP)
Fast Ethernet: UTP Cat5, EIA/TIA-568 100-ohm screened twisted-pair (STP)
Diagnostic LEDs Link: LED indicator lit when there is an active Ethernet link
Activity: LED indicators blink whenever there is a reception or transmission of a frame
Protocol CSMA/CD
MTBF 176330 hrs
Network Data Transfer Rate Ethernet: 10Mbps (Half-duplex)
Ethernet: 20 Mbps (Full-duplex)
Fast Ethernet: 100Mbps (Half-duplex)
Fast Ethernet: 200Mbps (Full-duplex)
|
|
